26 softstarters | 1sfc132005c0201, rev. m 1sfc132005c0201, rev. m | softstarters 27 pse C the efficient range description the pse softstarter range is the worlds first compact softstarter range with torque control. this makes the pse range an ideal choice for pumping applications where water hammering normally is a big problem. the compactness and advanced functionality of the pse means that it is also a very efficient solution for other applications such as compressors and fans. torque control the most important function when stopping pumps is torque control. since the pse softstarter is optimized for controlling pumps, this feature is a must. built-in by-pass for energy saving using by-pass after reaching full voltage will greatly reduce the power loss and thereby save energy. in the pse softstarter range, the by-pass is built-in on all sizes which will give the most compact starting solution and reduce the need for wiring during installation. coated circuit boards all circuit boards in the new pse softstarter have a protective coating to ensure a reliable operation even in tough environments like wastewater plants, where corrosive gases and acids may exist. motor protection the pse softstarter is equipped with built-in electronic overload protection, preventing the motor from overheating. since no additional overload device is needed, our efficient design saves both space, installation time, and ultimately money. analog output the analog output terminals can be connected to an analog current meter to show the current during operation. this eliminates the need of an additional current transformer. the analog output signal can also be used as an analog input to a plc. display and keypad the setup of the pse softstarter is done using the four button keypad and the illuminated display, providing a quick and easy setup. while operating, the display will also provide important status information such as current and voltage. external keypad as an option the pse softstarter can be equipped with an external keypad for easy setup and monitoring of the unit without opening the enclosure door. the keypad can also be used to copy parameters between different softstarters. pse C the efficient range description product description ? wide rated operational voltage 208C600 v ac ? wide rated control supply voltage 100C250 v, 50/60 hz ? rated operational current 18 to 370 a ? wide ambient temperature range, -25 to +60 oc ? coated circuit boards for reliable operation in harsh environment ? built-in by-pass on all sizes, saving energy and reducing installation time ? user friendly hmi with illuminated language neutral display and four button keypad ? optional external keypad, ip66 ? torque control for excellent control of pumps ? current limit, adjustable between 1.5C7 x i e ? motor overload protection with classes 10a, 10, 20 and 30 ? motor underload protection to detect pumps running dry ? locked rotor protection, detecting jammed pumps ? kick start to start jammed pumps or conveyor belts ? analog output showing operational current, 4C20 ma ? optional fieldbus communication using profibus, modbus, devicenet or canopen ? sophisticated algorithm eliminating the dc-component and thereby providing excellent starting performance the pse softstarter can be selected according to the rated motor power in normal duty applications like pumps, compressors, elevators, escalators, short conveyor belts and bow thrusters. see page 30. for heavy-duty applications like centrifugal fans, crushers, mixers, mills, stirrers and long conveyor belts, select a softstarter from page 31. 3 output signal relays (run, tor, event) screw mounting input for reset of faults analog output built-in by-pass all data available on the front external keypad with same design as the fxed hmi settings green ready led flashing - suppy available steady - main available green run led flashing - ramping up/down steady - tor yellow protection led red fault led back-lit display user friendly keypad similar as for pst(b) four digits showing values and messages icons showing functions. language neutral
28 softstarters | 1sfc132005c0201, rev. m 1sfc132005c0201, rev. m | softstarters 29 pse C the efficient range overview pse18 ... pse105 softstarter, type normal start in-line connected pse18 PSE25 pse30 pse37 pse45 pse60 pse72 pse85 pse105 (400 v) kw 7.5 11 15 18.5 22 30 37 45 55 iec, max. a 18 25 30 37 45 60 72 85 106 (440-480 v) hp 10 15 20 25 30 40 50 60 75 ul, max fla 18 25 28 34 42 60 68 80 104 400 v, 40 oc using mccb only, type 1 coordination will be achieved mccb (35 ka), type t2n160 t3n250 mccb (50 ka), type t2s160 t3s250 to achieve type 2 coordina - tion, semi-conductor fuses must be used fuse protection (85 ka), semiconductor fuses, bussmann, type 170m1563 170m1564 170m1566 170m1567 170m1568 170m1569 170m1571 170m1572 170m3819 suitable switch fuse for re - commended semi-conductor fuses switch fuse, type os32gd03p os63gd03p os125gd03p os250d03p the line contactor is not required for the softstarter itself but often used to open if ol trips line contactor, type af26 af30 af38 af52 af65 af80 af96 af116 overload protection is used to protect the motor from over heating electronic overload relay, type built-in the by-pass will reduce the power loss of the softstarter. by-pass, type built-in the table above is an overview of possible combinations of devices. complete coordination tables are available at www.abb.com/lowvoltage pse C the efficient range overview pse142 ... pse170 pse210 ... pse370 softstarter, type normal start in-line connected pse142 pse170 pse210 PSE250 pse300 pse370 (400 v) kw 75 90 110 132 160 200 iec, max. a 143 171 210 250 300 370 (440-480 v) hp 100 125 150 200 250 300 ul, max fla 130 169 192 248 302 361 400 v, 40 oc using mccb only, type 1 coordination will be achieved mccb (35 ka), type t3n250 t4n320 t5n400 t5n630 mccb (50 ka), type t3s250 t4s320 t5s400 t5s630 to achieve type 2 coordina - tion, semi-conductor fuses must be used fuse protection (85ka), semiconductor fuses, bussmann, type 170m5809 170m5810 170m5812 170m5813 170m6812 170m6813 suitable switch fuse for re - commended semi-conductor fuses switch fuse, type os400d03p os630d03p the line contactor is not required for the softstarter itself but often used to open if ol trips line contactor, type af140 af190 af205 af265 af305 af370 overload protection is used to protect the motor from over heating electronic overload relay, type built-in the by-pass will reduce the power loss of the softstarter. by-pass, type built-in quick guide for selection normal start class 10 heavy-duty start class 30 ordering - see page 30 ordering - see page 31 typical applications ? bow thruster ? centrifugal pump ? centrifugal fan ? conveyor belt (long) ? compressor ? conveyor belt (short) ? crusher ? mill ? elevator ? escalator ? mixer ? stirrer if more than 10 starts/h ! select one size larger than the standard selection how to select the correct size by using the guide here, you can quickly select a suitable softstarter for the most common applications. if a more precise selection is required, you can use the softstarer selection tool available at www.abb.com/lowvoltage
30 softstarters | 1sfc132005c0201, rev. m 1sfc132005c0201, rev. m | softstarters 31 pse C the efficient range normal starts, class 10, in-line, ordering details pse18 ... pse370 rated operational voltage, u e , 208-600 v ac rated control supply voltage, u s , 100-250 v ac, 50/60 hz motor power 230 v p e kw 400 v p e kw 500 v p e kw iec max rated operational curent i e a type order code weight kg 1 piece 4 7.5 11 18 pse18-600-70 1sfa897101r7000 2.4 5.5 11 15 25 PSE25-600-70 1sfa897102r7000 2.4 7.5 15 18.5 30 pse30-600-70 1sfa897103r7000 2.4 9 18.5 22 37 pse37-600-70 1sfa897104r7000 2.4 11 22 30 45 pse45-600-70 1sfa897105r7000 2.4 15 30 37 60 pse60-600-70 1sfa897106r7000 2.4 18.5 37 45 72 pse72-600-70 1sfa897107r7000 2.5 22 45 55 85 pse85-600-70 1sfa897108r7000 2.5 30 55 75 106 pse105-600-70 1sfa897109r7000 2.5 40 75 90 143 pse142-600-70 1sfa897110r7000 4.2 45 90 110 171 pse170-600-70 1sfa897111r7000 4.2 59 110 132 210 pse210-600-70 1sfa897112r7000 12.4 75 132 160 250 PSE250-600-70 1sfa897113r7000 13.9 90 160 200 300 pse300-600-70 1sfa897114r7000 13.9 110 200 250 370 pse370-600-70 1sfa897115r7000 13.9 pse C the efficient range heavy-duty starts, class 30, in-line, ordering details pse18 ... pse370 rated operational voltage, u e , 208-600 v ac rated control supply voltage, u s , 100 - 250 v ac, 50/60 hz motor power 230 v p e kw 400 v p e kw 500 v p e kw iec max rated operational curent i e a type order code weight kg 1 piece 3 5.5 7.5 12 pse18-600-70 1sfa897101r7000 2.4 4 7.5 11 18 PSE25-600-70 1sfa897102r7000 2.4 5.5 11 15 25 pse30-600-70 1sfa897103r7000 2.4 7.5 15 18.5 30 pse37-600-70 1sfa897104r7000 2.4 9 18.5 22 37 pse45-600-70 1sfa897105r7000 2.4 11 22 30 45 pse60-600-70 1sfa897106r7000 2.4 15 30 37 60 pse72-600-70 1sfa897107r7000 2.5 18.5 37 45 72 pse85-600-70 1sfa897108r7000 2.5 22 45 55 85 pse105-600-70 1sfa897109r7000 2.5 30 55 75 106 pse142-600-70 1sfa897110r7000 4.2 40 75 90 143 pse170-600-70 1sfa897111r7000 4.2 45 90 110 171 pse210-600-70 1sfa897112r7000 12.4 59 110 132 210 PSE250-600-70 1sfa897113r7000 13.9 75 132 160 250 pse300-600-70 1sfa897114r7000 13.9 90 160 200 300 pse370-600-70 1sfa897115r7000 13.9 heavy duty pse210 ... pse370 1sfc132310f0002 pse18 ... pse105 1sfc132311f0001 pse142 ... pse170 1sfc132312f0002 pse210 ... pse370 1sfc132310f0002 pse18 ... pse105 1sfc132311f0001 pse142 ... pse170 1sfc132312f0002
32 softstarters | 1sfc132005c0201, rev. m 1sfc132005c0201, rev. m | softstarters 33 pse C the efficient range accessories cable connectors for cu cables for softstarter type wire range mm 2 tightening torque max. nm type order code pack ing piece weight kg 1 piece pse142 170 6-120 14 C 1sda06691r1 3 0.200 pse142 170 2 x (50-120) 16 lz185-2c/120 1sfn074709r1000 3 0.100 pse210 370 16-300 25 C 1sda055016r1 3 0.133 cable connectors for al and cu cables for softstarter type wire range mm 2 tightening torque max. nm type order code pack ing piece weight kg 1 piece pse142 170 95-185 31 C 1sda054988r1 3 0.078 pse210 370 185-240 43 C 1sda055020r1 3 0.133 terminal enlargements for softstarter type dimensions hole ? mm 2 bar mm type order code pack ing piece weight kg 1 piece pse18...105 6.5 15 x 3 lw110 1sfn074307r1000 1 0.100 pse142...170 10.5 17.5 x 5 lw185 1sfn074707r1000 1 0.450 pse210...370 10.5 20 x 5 lw300 1sfn075107r1000 1 1.230 terminal nut washer for softstarter type req. qty type order code pack ing piece weight kg 1 piece pse142...170 2 le185 1sfn074716r1000 2 0.200 pse210...370 2 le300 1sfn075116r1000 2 0.300 terminal shrouds for softstarter type suitable for req. qty type order code pack ing piece weight kg 1 piece pse142...170 cable connectors 2 lt185-ac 1sfn124701r1000 2 0.050 pse142...170 compression lugs 2 lt185-al 1sfn124703r1000 2 0.220 pse210...370 cable connectors 2 lt300-ac 1sfn125101r1000 2 0.070 pse210...370 compression lugs 2 lt300-al 1sfn125103r1000 2 0.280 external keypad including a 3m cable for softstarter type type order code pack ing piece weight kg 1 piece pse18...370 pseek 1sfa897100r1001 1 C usb-cable for service engineer tool for softstarter type type order code pack ing piece weight kg 1 piece pse18...370 pseca 1sfa897201r1001 1 0.130 fieldbusplug connection accessory for softstarter type type order code pack ing piece weight kg 1 piece the same accessory for all sizes ps-fbpa 1sfa896312r1002 1 0.060 abbs fieldbusplug suitable for all sizes. see page 50-53 pse C the efficient range technical data rated insulation voltage u i 600 v analog output rated operational voltage u e 208 ... 600 v +10%/-15% output signal reference 4 ... 20 ma rated control supply voltage u s 100 ... 250 v +10%/-15%, 50/60 hz 5 % type of output signal i amp rated control circuit voltage u c internal 24 v dc scaling fixed at 1.2 x i e starting capacity at i e 4xi e for 10 sec. control circuit number of starts per hour 10 1) number of inputs 3 (start, stop, reset of faults) overload capability, signal indication leds overload class 10 on / ready green fashing / steady ambient temperature run / tor green fashing / steady during operation -25 +60 c 2) protection yellow during storage -40 +70 c fault red maximum altitude 4000 m 3) protections degree of protection electronic overload yes (class 10a, 10, 20, 30) main circuit ip00 locked rotor protection yes supply and control circuit ip20 underload protection yes main circuit built-in by-pass yes field bus connection cooling system - fan cooled connection for (thermostat controlled) yes abb fieldbusplug yes (option) hmi for settings external keypad display 4 7-segments and icons. illuminated display lcd type keypad 2 selection keys and 2 navigation keys ambient temperature main settings during operation -25 +60 c setting current size dependent during storage -40 +70 c ramp time during start 1-30 sec degree of protection ip66 ramp time during stop 0-30 sec initial/end voltage 30-70% current limit 1.5-7xi e torque control for start yes / no torque control for stop yes / no kick start off, 30-100% signal relays number of signal relays 3 k2 run signal k3 tor (by-pass) signal k1 event signal rated operational voltage u e 250 v ac/24 v dc 4) rated thermal current i th 3 a rated operational current i e at ac-15 (u e = 250 v) 1.5 a 1) valid for 50% on time and 50% off time. if other data is required, please contact your sales offce 2) above 40 oc up to max. 60 oc reduce the rated current with 0.6% per oc. 3) when used at high altitudes above 1000 meters up to 4000 meters you need to derate the rated current using the following formula. [ % of i e = 100 - x - 1000 ] x = actual altitude for the softstarter 150 4) a common voltage needs to be used for all 3 signal relays class 30 class 20 class 10 class 10 a 8 7 6 5 4 3 2 1 10 000 1000 100 10 1 0 0 ti me (s) current (x i e ) tripping curves for electronic overload protection (cold) ps-fbpa pseek 1sfc132168f0001 1sfc132328f0002 pseca 1sfc132355f0002 1sft98099-011c1 1sft98000-011c3 lw... 1sft98099-019c3 1sft98099-125 lt ... -ac lt ... -al le185 1sfc132321f0002 1sft98099-095c2 sb8054c2 lz...
e1858d 17.5 ? 8.5 5 e1859d 20 ? 10.2 5 34 softstarters | 1sfc132005c0201, rev. m 1sfc132005c0201, rev. m | softstarters 35 pse C the efficient range technical data fuse ratings and power losses recommended abbs overload protection for softstarter current range max power loss at rated i e (internal by-pass) max fuse raiting - main circuit 1) power requirements supply circuit holding (va) / pull-in (va) bussmann fuses, din43 620 (knife) type type a w a type size pse pse18 integrated 5.4-18 0.2 40 170m1563 000 16/19.9 PSE25 integrated 7.5-25 0.4 50 170m1564 000 16/19.9 pse30 integrated 9-30 0.5 80 170m1566 000 16/19.9 pse37 integrated 11.1-37 0.8 100 170m1567 000 16/19.9 pse45 integrated 13.5-45 1.2 125 170m1568 000 16/19.9 pse60 integrated 18-60 2.2 160 170m1569 000 16/19.9 pse72 integrated 21.6-72 3.1 250 170m1571 000 16/19.9 pse85 integrated 25.5-85 4.3 315 170m1572 000 16/19.9 pse105 integrated 31.8-106 6.6 400 170m3819 1* 16/19.9 pse142 integrated 42.9-143 12.1 450 170m5809 2 16/31 pse170 integrated 51.3-171 17.6 500 170m5810 2 16/31 pse210 integrated 63-210 8.8 630 170m5812 2 30/700 PSE250 integrated 75-250 12.5 700 170m5813 2 30/700 pse300 integrated 90.6-302 18 800 170m6812 3 30/700 pse370 integrated 111-370 27.4 900 170m6813 3 30/700 1) for the supply circuit 6 a delayed, for mcb use c characteristics. pse C the efficient range ul ratings 3-phase motor rating C in-line softstarters motor power p (hp) and full load current fla (a) max u e u e u e u e fla 200 v/208 v 220 v/240 v 440 v/480 v 550 v/600 v type a hp hp hp hp pse18 18 5 5 10 15 PSE25 25 7.5 7.5 15 20 pse30 28 7.5 10 20 25 pse37 34 10 10 25 30 pse45 42 10 15 30 40 pse60 60 20 20 40 50 pse72 68 20 25 50 60 pse85 80 25 30 60 75 pse105 104 30 40 75 100 pse142 130 40 50 100 125 pse170 169 60 60 125 150 pse210 192 60 75 150 200 PSE250 248 75 100 200 250 pse300 302 100 100 250 300 pse370 361 125 150 300 350 cross section of connection cables type of softstarter pse18 ... pse105 pse142 ... pse170 pse210 ... pse370 main circuit connection clamp solid/stranded 1 x mm 2 2.5C70 see accessories solid/stranded 2 x mm 2 2.5C70 see accessories tightening torque (recommended) nm 9 see accessories connection bar width and thickness mm hole diameter mm tightening torque (recommended) nm 9 18 28 supply and control circuit connection clamp solid/stranded 1 x mm 2 2.5 2.5 2.5 solid/stranded 2 x mm 2 1.5 1.5 1.5 tightening torque (recommended) nm 0.5 0.5 0.5
|
